Mobile Home Setup Materials

Use wedges during setup of your mobile home

A split bolt to twist a frame strap into place.

Zip cap to go on top of an anchor that does not already have a bell.

Used to install windows, doors, and vents, this 3/4" x 30' Putty Tape is perfect for mobile home owners looking to make their lives easier. It can seal even the most difficult of areas, thanks to its flexibility and durability.

Pier Pad for Mobile Home Manufactured Housing.  Create a level surface for your blocks and spread the weight over a larger surface area.

8 foot strap with frame clamp.

Washing Machine 1/2" Cut Off Valve

Bottom board plastic that is 4' wide by 14' long

Bottom board tape is strong, really strong.  Stickius maximus.

Stabilizing Anchor for Mobile Home Manufactured Housing

This 10" x 50' Galvanized Steel Flashing can be used to seal up joints and anlges around your house. Predominantly used for roofing, this steel flashing seals up cracks and gaps so as to make them waterproof and insulated.

This kit includes a 33" stabilizing anchor, an 8' strap with frame clamp, and the split bolt to tighten the strap.

This 12" x 60' Galvanized Steel Flashing can be used to seal up joints and anlges around your house. Predominantly used for roofing, this steel flashing seals up cracks and gaps so as to make them waterproof and insulated.

Construction Grade Plastic Sheeting.  16' wide by 100' long.  Use as a barrier, covering, or temporary tarp.

Bottom board plastic that is 16 feet wide and 80 feet long.

150 stabilizing anchors for tying down mobile homes.