PEX Plastic Compression Fittings

Slide on a Poly Adapter to connect Polybutylene tubing to a Flair-It compression fitting.

Put an end to 1/2" pipe with the half inch cap.

Cap off open 3/8" threaded pipe or compression fittings with the three eighths inch cap.

Connect 3/8" tubing into a 3/8" female fitting with the three eighths by three eighths male adapter.

Connect 1/2" tubing into a 1/2" female fitting with the half inch by half inch male adapter.

Connect 1/2" tubing to a 1/2" female fitting at a perpendicular angle with the half inch by half inch male elbow.

Cap off 3/4" threaded pipe or open Flair-It fittings with the three quarter inch cap.

Connect 1/2" tubing into a 3/4" female fitting with the half by three quarters male adapter.

Connect 1/2" tubing into a 3/8" female fitting with the half by three eighths male adapter.

Connect 3/8" tubing into a 1/2" female fitting with the three eighths by half male adapter.

Connect 1/2" tubing to a 3/8" female fitting at a perpendicular angle with the half inch by three eighths inch male elbow.

Connect 1/2" tubing to 1/2" pipe with the half inch by half inch female adapter.

Connect 3/8" tubing to 3/8" tubes with the three eighths by three eighths coupling

Connect 3/8" tubing to 3/8" tubes on a 90 degree turn with the three eighths by three eighths elbow.

Connect 3/8" tubing to a 1/2" male pipe with the three eighths by half swivel coupling.

Connect three 3/8" PEX or Poly tubes with the three-eighths three-eighths three-eighths tee.

Connect 3/4" tubing into a 3/4" female fitting with the three quarters by three quarters male adapter.

Connect 3/8" tubing into a 1/2" female fitting with the three eighths by half inch male elbow adapter.

Connect a 1/2" PEX or Poly tube to a 1/2" female fitting and perpendicularly to another 1/2" female fitting with the half half male half male tee.

Connect 1/2" tubing into a 3/4" male pipe fitting with the half by three quarters female adapter.

Connect 1/2" tubing into a 3/8" male pipe fitting with the half by three eighths female adapter.

Connect 1/2" tubing to a 1/2" male pipe fitting at a perpendicular angle with the half inch by half inch female elbow.

Connect 1/2" tubing to 3/8" tubes with the half by three-eighths coupling

Connect two 1/2" tubes in perpendicular direction with the half by half coupling

Connect 3/8" tubing to a 1/2" male pipe with a perpendicular turn using the three eighths by half swivel elbow.

Connect 1/2" tubing to a 1/2" male pipe turning 90 degrees with the half by half swivel elbow.

Connect three 1/2" PEX or Poly tubes with the half half half tee.

Connect 3/4" tubing into a 3/4" female fitting at a 90 degree angle with the three quarters by three quarters male elbow.

Connect 3/4" tubing to 1/2" tubes at a 90 degree angle with the three quarters by half inch elbow.

Connect 3/8" tubing to a 3/4" male pipe turning 90 degrees with the three eighths by three quarters swivel elbow.

Connect 3/4" tubing into a 1/2" female fitting at a 90 degree angle with the three quarters by half inch male elbow.

Connect two 1/2" PEX or Poly tubes in line with each other, and a 1/2" female fitting perpendicularly with the half half half male tee.

Connect 3/4" tubing into a 3/4" male pipe fitting with the three quarters by three quarters female adapter.

Connect two 1/2" tubing pipes with the half by half coupling

Connect 1/2" tubing to 3/4" tubes with the half by three quarters coupling

Connect 3/4" tubing to 3/4" tubes with the three quarters by three quarters coupling